Products for forging (steel, stainless steel, nickel, titanium, aluminum), rolling mills, ceramic slide plates, roll casting, charging plates for carbide, cold expansion.

MECHANO-LUBE® 1VP18

Product description
MECHANO-LUBE® 1VP18 is a technical innovation in the field of water based lubricants for the hot metal forming process. It has been developed to solve the Leidenfrost problem and to improve the spreading properties on very hot surfaces. Due to the improved spraying properties MECHANO-LUBE® 1VP18 provides complete die coating and higher efficiency by reduced consumption. The outstanding formulation does not create foam during dilution and stirring. Special property of this dispersion is the high content of very fine ground and special processed graphite. MECHANO-LUBE® 1VP18 is extremely versatile and performs well over an extremely wide range of operating conditions.The dispersion has a shelf life of 9 month without stirring.The special processed graphite shows a low friction coefficient and sticks even on very hot surfaces. MECHANO-LUBE® 1VP18 can be isolated with normal precipitation procedure
of waste water treatment.

Applications

Properties

Technical data

Technical Data MECHANO Lube 1Vp18

Dilution and storage
MECHANOLUBE® 1VP18 is supplied as a concentrate and can normally be
diluted with ordinary tap water prior ready to use.

The product should not be exposed to direct sun. Shelf life under normal
conditions 9 month.

Service:
It is our commitment to provide the best service. Our technical staff will be
happy to serve you

weitere Schmierstoffe

Product description
MECHANO-LUBE® 1D6 is a water based graphite dispersion for the cold bar forging and expanding. MECHANO-LUBE® 1D6 is designed for high pressing force of >50 MN and sticks perfectly. The formulation avoids contact welding. MECHANO-LUBE® 1D6 can be applied by painting, spraying rolling.

Applications

Properties

Technical data

Technical Data MECHANO Lube 1D6

Dilution
MECHANO-LUBE® 1D6 is supplied as a concentrate and can normally be diluted with ordinary tap water prior ready to use.

Note:
The product is “Made in Germany” and manufactured with high quality raw materials.
We focus on consulting and have 30 years of experience.
Our application technology is at your disposal.

The above information is given to the best of our knowledge. They represent average data, with the usual tolerances for raw materials.
No guarantee can be given for the correctness of the results obtained from the use of these products. Existing laws and regulations must be observed by the recipient of our products at his own responsibility.

Product Description
MECHANO-LUBE® 1D8 is an innovation in the field of water based lubricants for forging. Thanks to the optimized surface tension, the product can be sprayed much better and finer, resulting in a complete die cover. MECHANO-LUBE® 1D8 can therefore be used more economic. Foam formation occurs neither during dilution nor during stirring.


Due to its composition, MECHANO-LUBE® 1D8 does not build up an inorganic layer and does not tend to bond the ejectors. The product contains no silicates (waterglass). It is easy to dilute and has an extended shelf life. The special ground graphite ensures a low friction coefficient. MECHANO-LUBE® 1D8 can be precipitated or recycled in waste water purification plants with conventional precipitants. Another novelty of MECHANO-LUBE® 1D8 is re-usability after frost damage. The dispersion can be stirred up again after thawing and can be used.

Applications

Properties

Technical data

Technical details Mechano-Lube 1d8

Dilution
MECHANO-LUBE® 1D8 is supplied as a concentrate and can normally be diluted with ordinary tap water prior ready to use.

Storage
MECHANO-LUBE® 1D8 should not be exposed to direct sun. Protect against frost. Shelf life under normal storage conditions 12 month. Container must be tightly closed again after use to prevent contamination and loss of water.

Remark:
Profit from our long-lasting experience in the field of hot metal
forming and contact us. We are ready to assist you.

Product description
MECHANO-LUBE® 1VP12 is a water based graphite dispersion for the hot metal forming process. Special property of this dispersion is the high content of very fine ground and special processed graphite. MECHANO-LUBE® 1VP12 is extremely versatile and performs well over an extremely wide range of operating conditions. The dispersion has a shelf life of 9 month without stirring. The special processed graphite shows a low friction coefficient and sticks even on very hot surfaces. MECHANO-LUBE® 1VP12 can be isolated with normal precipitation procedure of wastewater treatment

Applications

Features

Technical data

Technical data Mechano Lube 1VP12

Dilution
MECHANO-LUBE® 1VP12 is supplied as a concentrate and can normally be diluted with ordinary tap water prior ready to use.

Storage
MECHANO-LUBE® 1VP12 should not be exposed to direct sun. Protect against frost. Shelf life under normal storage conditions and under original seal 12 month. Container must be tightly closed again after use to prevent contamination and loss of water.

Remark
In case the product is frozen it can be reused after thawing and stirring. VP12 is the only lubricant which can be saved after freezing.
Profit from our long-lasting experience in the field of forging and contact us. We are ready to assist you.

Product description
MECHANO-LUBE® 1VP19 is a billet coating dispersion for various applications and metal alloys. MECHANO-LUBE® 1VP19 remain stable and resists deterioration even when exposed to very high temperatures up to 1200°C. The maximum exposure time depends on furnace conditions. In Induction furnace it can exceed 10 minutes at 1000°C without protective atmosphere. MECHANO-LUBE® 1VP19 can be used also for aluminum extrusion. It can be spayed as well as dipped or painted. The steel billet canbe scale protected.

Applications

Features

Technical data

Technical Data MECHANO Lube 1VP19

Dilution and storage
MECHANO-LUBE® 1VP19 is supplied as a concentrate and can normally be diluted with ordinary tap water prior ready to use. The product should not be exposed to direct sun. Shelf life under normal storage conditions 9 month.

Service
It is our commitment to provide the best service. Our technical staff will be happy to serve you.

Product description

Water based Boron Nitride dispersion. MECHANO-LUBE® 6D1 is formulated to allow dilution without degrading performance and is often used for dipping parts and to form a relatively hard coating just on drying. Thus, MECHANO-LUBE® 6D1 is typically selected for applications that require a harder surface (i.e., components that move while in contact with molten metal).

Applications

Properties:

Technical data

Technical Data MECHANO Lube 6d1

Dilution and storage
MECHANO-LUBE® 6D1 is supplied as a concentrate and can normally diluted with ordinary tap water prior ready to use.

Storage
The product should not be exposed to direct sun. Shelf life under normal storage conditions 9 month. MECHANO-LUBE® 1M3 should be stored in a cool dry place.

Note:
We focus on consulting and have 30 years of experience! Our application technology is at your disposal.

The above information is given to the best of our knowledge. They represent average data, with the usual tolerances for raw materials. No guarantee can be given for the correctness of the results obtained from the use of these products. Existing laws and regulations must be observed by the recipient of our products at his own responsibility.