Products for forging (steel, stainless steel, nickel, titanium, aluminum), rolling mills, ceramic slide plates, roll casting, charging plates for carbide, cold expansion.

MECHANO-LUBE® 7VP628

Product description

MECHANO-LUBE® 7VP628 Dispersion is a water based talcum dispersion and contains no binder. Special property of this dispersion is the high solid content with moderate viscosity. MECHANO-LUBE® 7VP628 Dispersion is extremely versatile and performs well over an extremely wide range of operating conditions. The dispersion can be easily re-dispersed with simply stirring even after long shelf. The special processed talcum shows a perfect platelet structure and can be easily diluted with water. MECHANO-LUBE® 7VP628 Dispersion can be isolated with normal precipitation procedure of waste water treatment.

Applications

Properties

Technical data

Technical data MECHANO-LUBE® 7VP628

Dilution


The product is ready for use, but can be diluted with water if necessary.

Note:
Information provided on this technical data sheet indicates the approximate physical and chemical properties of the material. No
warranty is made either expressed or implied regarding the accuracy or the results to be obtained from the use of such information.

More lubricants

Product description
MECHANO-LUBE® 1D6 is a water based graphite dispersion for the cold bar forging and expanding. MECHANO-LUBE® 1D6 is designed for high pressing force of >50 MN and sticks perfectly. The formulation avoids contact welding. MECHANO-LUBE® 1D6 can be applied by painting, spraying rolling.

Applications

Properties

Technical data

Technical Data MECHANO Lube 1D6

Dilution
MECHANO-LUBE® 1D6 is supplied as a concentrate and can normally be diluted with ordinary tap water prior ready to use.

Note:
The product is “Made in Germany” and manufactured with high quality raw materials.
We focus on consulting and have 30 years of experience.
Our application technology is at your disposal.

The above information is given to the best of our knowledge. They represent average data, with the usual tolerances for raw materials.
No guarantee can be given for the correctness of the results obtained from the use of these products. Existing laws and regulations must be observed by the recipient of our products at his own responsibility.

Product Description
MECHANO-LUBE® 1D8 is an innovation in the field of water based lubricants for forging. Thanks to the optimized surface tension, the product can be sprayed much better and finer, resulting in a complete die cover. MECHANO-LUBE® 1D8 can therefore be used more economic. Foam formation occurs neither during dilution nor during stirring.


Due to its composition, MECHANO-LUBE® 1D8 does not build up an inorganic layer and does not tend to bond the ejectors. The product contains no silicates (waterglass). It is easy to dilute and has an extended shelf life. The special ground graphite ensures a low friction coefficient. MECHANO-LUBE® 1D8 can be precipitated or recycled in waste water purification plants with conventional precipitants. Another novelty of MECHANO-LUBE® 1D8 is re-usability after frost damage. The dispersion can be stirred up again after thawing and can be used.

Applications

Properties

Technical data

Technical details Mechano-Lube 1d8

Dilution
MECHANO-LUBE® 1D8 is supplied as a concentrate and can normally be diluted with ordinary tap water prior ready to use.

Storage
MECHANO-LUBE® 1D8 should not be exposed to direct sun. Protect against frost. Shelf life under normal storage conditions 12 month. Container must be tightly closed again after use to prevent contamination and loss of water.

Remark:
Profit from our long-lasting experience in the field of hot metal
forming and contact us. We are ready to assist you.

Produkt Beschreibung
MECHANO-LUBE® 1M2 is a lubricant powder in instant form. This product was special developed for mandrel bar lubrication. The unique property of this product is the special treated graphite and the additives. The graphite is special refined and purified crystalline natural graphite. MECHANO-LUBE® 1M2 provides outstanding pressure and temperature stability as well as low friction coefficient. Selected additives enable an easy dispersibility in water and excellent adhesion on different mandrels including chromium-plated mandrels. No buildup after rolling process and no carburization. MECHANO-LUBE® 1M2 is stable against contamination with descaling agents. It can be applied with all common spraying systems such as airspraying and airless systems.

Applications

Properties

Technical data

Technical data MECHANO-LUBE® 1M2

How to prepare a dispersion
Tap water quality until max. 14°dGH can be used.
Carefully add the calculated quantity of MECHANO-LUBE® 1M2 (depending on the required quantity) into mixing tank equipped with a stirrer and containing the right quantity of water and mix thoroughly. Using dissolvers or jetstream mixers fits best. Dispersion is ready after 60 minutes stirring time.
The ration between powder and/or water enable you to produce the solid content of your choice up to 30 % solid content.

Storage
The product should be stored in a cool dry place

Remark:
Profit from our long lasting experience in the field of hot metal forming and contact us. We are ready to assist you.

Product description
MECHANO-LUBE® 1P9 is a special ground natural graphite. MECHANO-LUBE® 1P9 shows an excellent compatibility with a wide range of lacquer formulations as well as with polymer systems like thermoplastics or thermo setting resins. Because of the special refining method MECHANO-LUBE® 1P9 is suitable as lubricant and coating aid.

Applications

Properties

Properties Mechano-Lube 1P9

Note:
Information provided on this technical data sheet indicates the approximate physical and chemical properties of the material. No
warranty is made either expressed or implied regarding the accuracy or the results to be obtained from the use of such information.

Product description
MECHANO-LUBE® 1VP12 is a water based graphite dispersion for the hot metal forming process. Special property of this dispersion is the high content of very fine ground and special processed graphite. MECHANO-LUBE® 1VP12 is extremely versatile and performs well over an extremely wide range of operating conditions. The dispersion has a shelf life of 9 month without stirring. The special processed graphite shows a low friction coefficient and sticks even on very hot surfaces. MECHANO-LUBE® 1VP12 can be isolated with normal precipitation procedure of wastewater treatment

Applications

Features

Technical data

Technical data Mechano Lube 1VP12

Dilution
MECHANO-LUBE® 1VP12 is supplied as a concentrate and can normally be diluted with ordinary tap water prior ready to use.

Storage
MECHANO-LUBE® 1VP12 should not be exposed to direct sun. Protect against frost. Shelf life under normal storage conditions and under original seal 12 month. Container must be tightly closed again after use to prevent contamination and loss of water.

Remark
In case the product is frozen it can be reused after thawing and stirring. VP12 is the only lubricant which can be saved after freezing.
Profit from our long-lasting experience in the field of forging and contact us. We are ready to assist you.

Product description
MECHANO-LUBE® 1VP19 is a billet coating dispersion for various applications and metal alloys. MECHANO-LUBE® 1VP19 remain stable and resists deterioration even when exposed to very high temperatures up to 1200°C. The maximum exposure time depends on furnace conditions. In Induction furnace it can exceed 10 minutes at 1000°C without protective atmosphere. MECHANO-LUBE® 1VP19 can be used also for aluminum extrusion. It can be spayed as well as dipped or painted. The steel billet canbe scale protected.

Applications

Features

Technical data

Technical Data MECHANO Lube 1VP19

Dilution and storage
MECHANO-LUBE® 1VP19 is supplied as a concentrate and can normally be diluted with ordinary tap water prior ready to use. The product should not be exposed to direct sun. Shelf life under normal storage conditions 9 month.

Service
It is our commitment to provide the best service. Our technical staff will be happy to serve you.

Product description
MECHANO-LUBE® 1VP496 is a water based graphite dispersion for the coating of ceramic plates and refractory materials. MECHANO-LUBE® 1VP496 reduces surface porosity and increases lubricity. It is characterized by a superior oxidation resistance, spreading property and high solid content. The product is slightly thixotropic.

Applications

Features

Technical data

Technical data MECHANO-LUBE® 1VP496

Note:
Information provided on this technical data sheet indicates the approximate physical and chemical properties of the material. No
warranty is made either expressed or implied regarding the accuracy or the results to be obtained from the use of such information.

Product description
MECHANO-LUBE® 1VP574 is a water based graphite dispersion containing a special releasing aid for hot aluminum forging. Special property of this dispersion is the high content of very fine ground and special processed graphite. MECHANO-LUBE® 1VP574 is extremely versatile and performs well for complicated work piece. The flow ability of the aluminum will be improved due to the reduction of the oxide layer. The dispersion has a shelf life of 9 month without stirring. The special processed graphite shows a low friction coefficient.

Applications

Properties

Technical data

Technical data MECHANO-LUBE® 1VP568

Note:
Information provided on this technical data sheet indicates the approximate physical and chemical properties of the material. No
warranty is made either expressed or implied regarding the accuracy or the results to be obtained from the use of such information.

Product description

MECHANO-LUBE® 3VP697 is a water-based graphite dispersion with high purity. Due to its low surface tension, it shows excellent spreading properties. MECHANO-LUBE® 3VP697 contain special ground platelet shape graphite. The additives are selected to avoid reactions with other materials. The product can be applied with all standard application methods (rolling, squeegeeing, brushing, spraying, etc.). MECHANO-LUBE® 3VP697 contains no solvents (VOC-free) and is nevertheless fast drying. After drying, an even, dense coating with a high sliding effect is formed. The coating can be washed off again with water.

Applications

Dilution

Depending on the application, the product can be diluted with water as desired.

Technical data

Technical data Mechano-Lube 3VP697

Note:
Information provided on this technical data sheet indicates the approximate physical and chemical properties of the material. No
warranty is made either expressed or implied regarding the accuracy or the results to be obtained from the use of such information.

Product description

MECHANO-LUBE® 6VP747 is an oil and solvent-free boron nitride dispersion for various application methods (spraying, dipping, rolling, etc.). MECHANO-LUBE® 6VP747 is a replacement product for oil-based release agents and lubricants for high-temperature applications. The product does not generate any polycyclic decomposition products.

Applications

Properties

Technical data

Technical details Mechano-Lube 3VP746

Dilution


The product is ready for use, but can be diluted with water if necessary.

Note:
Information provided on this technical data sheet indicates the approximate physical and chemical properties of the material. No
warranty is made either expressed or implied regarding the accuracy or the results to be obtained from the use of such information.

Product description

MECHANO-LUBE® 6D1 is a water based Boron Nitride dispersion with particularly good wetting and adhesion, even on hot surfaces. MECHANO-LUBE® 6D1 can be used in metal forming and aluminum casting and is resistant to temperatures far in excess of 1000°C. However, the product can also be used to produce electrically insulating layers. MECHANO-LUBE® 6D1 is also characterized by excellent thermal conductivity.
MECHANO-LUBE® 6D1 is formulated to allow dilution without degrading performance and is often used for dipping parts and to form a relatively hard coating just on drying. Thus, MECHANO-LUBE® 6D1 is typically selected for applications that require a harder surface (i.e., components that move while in contact with molten metal).

Applications

Properties:

Technical data

Dilution and storage
MECHANO-LUBE® 6D1 is supplied as a concentrate and can normally be diluted with ordinary tap water prior ready to use.

Storage
The product should not be exposed to direct sun. Shelf life under normal storage conditions 9 month. MECHANO-LUBE® 6D1 should be stored in a cool dry place.

Service
It is our commitment to provide the best service. Our technical staff will be happy to serve you.

Note:
We focus on consulting and have 30 years of experience! Our application technology is at your disposal.

The above information is given to the best of our knowledge. They represent average data, with the usual tolerances for raw materials. No guarantee can be given for the correctness of the results obtained from the use of these products. Existing laws and regulations must be observed by the recipient of our products at his own responsibility.

Product Description
MECHANO-LUBE® 1 is very pure special ground natural graphite. MECHANO-LUBE® 1 shows an excellent compatibility with a wide of lacquer formulations as well as with polymer systems like thermoplastics or thermosetting resins. Because of the special refining method, MECHANO-LUBE® 1 is suitable as lubricant and coating aid. This product shows an outstanding infrared diffusion and reflectance and can be used in insulating materials.

Applications

Properties

Typical particle size distribution

Typical particle shape

Typische Teichenform MECHANO-LUBE® 1

Information provided on this technical data sheet indicates the approximate physical and chemical properties of the material. No warranty is made either expressed or implied regarding the accuracy or the results to be obtained from the use of such information

Product Description
MECHANO-LUBE® 2 is very fine ground natural graphite with nano  particles size. MECHANO-LUBE® 2 has a unique particle shape and an excellent dispersibilty in almost all liquids. Because of its small particle size and very sharp particle size distribution, MECHANO-LUBE® 2 is very stable against sedimentation. The special grinding and classifying method of MECHANO-LUBE® 2 enables very low viscosities. It is compatible with a wide range of lacquer formulations (water and solvent based) as well as with polymer systems like thermoplastics or thermosetting resins.

Applications

Technical data

Technical Data MECHANO Lube 2

Typical particle size distribution

Typical particle shape

Typische Teichenform MECHANO-LUBE® 2

Information provided on this technical data sheet indicates the approximate physical and chemical properties of the material. No warranty is made either expressed or implied regarding the accuracy or the results to be obtained from the use of such information.